Clean-n-Dry Silicone Exterior Emulsion
Eureka Paints Clean-n-Dry is a Premium Silicone Exterior Emulsion having excellent Dirt Pick Up Resistance, water resistance, advanced anti algal properties. It has a very good sheen
Key Features
Eureka Paints very low water absorption apart from giving good algae resistance, colour fastness and very good sheen. Thus giving the building a fresh look for long period of time, which also reduces the maintenance cost Clean-n-Dry is a advanced durable all weather coating having very high dirt pick up resistance,
Substrate Suitability
Eureka Paints Clean-n-Dry can be applied on vast range of surfaces viz cement plaster, masonry, concrete, asbestos sheet ,POP, Gypsum etc.
How To Use
Surface Preparation
- Ensure that the substrate to be painted is free of any dirt, dust, oil, grease, any algea / fungal growth or any other type of contamination.
- This can be achieved by vigorous brushing of surface with media like wire, tar brush etc and cleaning with soft water.
- In case of pre painted surfaces - loose old paint etc should be throughly removed.
- Surfaces showing signs of chalking and flaking should be treated with some suitable sealer etc.
Touch Ups/Rectification
- Any touch up/ rectification required in the surface should be done with sand cement mortar only and it should be subjected to proper curing.
- For freshly plastered surface, care should be taken for proper curing and sufficient drying time.
Application System
Product | Application Tool |
Thinner | Dilution | Touch Dry | Recoat* |
Priming Eureka Paints Cement Paint |
Brush |
Water |
100% | 1hr | 2 Days After Minimum Curing - 3 Times |
OR | |||||
Eureka Paints EWP Exterior waterbase Acrylic Primer |
Brush, Roller, Spray |
Water | 60-70% | 30 mins | 4 hrs |
1st Coat Eureka Paints Clean n Dry Premium Silicone Exterior Emulsion |
Brush, Roller, Spray |
Water | 40-45% | 1hr | 4-6hrs |
2nd Coat Eureka Paints Clean n Dry Premium Silicone Exterior Emulsion |
Brush, Roller, Spray |
Water | 40-45% | 1hr | 4-6hrs |
* Recoat period is quoted for 25°C at 50% relative humidity - may vary under different conditions.
Technical Data
Covering** | On normal masonry surface brush applied 1 Coat : 10.5 - 11.5 sq mtr / ltr at recommended DFT 2 Coats : 5.5 - 6 sq mtr / ltr at recommended DFT |
Recommended Dry Film Thickness(DFT) |
60-70 microns for 2 coats |
Volume Solids | 40+/-2 |
Weight Per Ltr | 1.32+/-0.02 |
Gloss/Sheen Levels | 0 to 12 @ 60° head |
Viscosity | 106KU+/- 2 |
PH | 8 to 9 |
Water Absorption | Very Low |
Thinning | 40-45% by volume with water |
Drying Time | Touch Dry 1hr | Recoat : 4-6 hrs |
Shelf Life | Minimum 1yr when stored in original sealed container away from sunlight and excessive heat. |
Pot Life | 24 hrs |
** Actual coverage may vary on factors such as substrate porosity, method of application etc.
Precautions
Before Use
- Do not overdilute or over extend the brush
- Stir Well Before Use
Post Application
For performance optimisation - ensure proper washing and cleaning of structures at regular intervals.
Safety
Please refer to detailed MSDS of Clean n Dry for detailed information on safe handling of product.